Application Examples
Please note that some of the applications listed below are relative to particular Flame Spray systems. Contact us if you have any questions.
Typical applications can be broken down into two different categories – anti-corrosion and engineering coatings.
Anti-corrosion coatings are applied to generally protect steelwork from a corrosive atmosphere with the most commonly sprayed materials being zinc, aluminium and their alloys. Common application examples include the spraying of steel bridges, in-situ pipework in petrochemical refineries, street furniture and vehicle chassis’.
Engineering coatings cover a much wider range of applications where the coating could, for example, provide a wear protection surface, a thermal barrier coating or an electrically conductive path. Common applications include spraying steels to build up worn or mis-machined areas on a variety of components, conductive heater elements on carbon fibre wing edges and hard molybdenum coatings on selector forks.
Flame Spray Systems can be used in a range of applications including, but not limited to:
- Anti-corrosion coatings.
- Anti-spark coatings.
- Architectural Forged Iron Ornaments Restoration.
- Architectural metalwork.
- Bearing and seal surfaces.
- Bond coats.
- Bridges.
- Car Body Panel Repair.
- Cast iron fencing restoration.
- Cellulose pressure roll.
- Ceramics for insulation, heat resistance (thermal barrier) etc.
- Clutch Diaphragm Springs Reclamation.
- Corrosion under insulation applications.
- Crucible vessels.
- Cruise ship bearing.
- Engineering coatings.
- Exhaust systems.
- Fences/gates.
- Fine coatings with low heat input.
- Grip coatings.
- Marine applications.
- Mining components.
- Molybdenum.
- Mould manufacturing.
- Non-critical surface restoration.
- Offshore platforms.
- Pipelines.
- Piston Rings.
- Reclaiming parts.
- Reclamation of ball bearing seats on rubber coated print rollers.
- Reclamation of engineering components.
- Reclamation of propeller shafts.
- Reclamation of rudder posts.
- Self fluxing alloys for extreme wear applications.
- Sliding wear applications requiring self-lubricating coatings.
- Spinning machine trough ceramic coating.
- Spray/fused coatings.
- Steel clutch lever reclamation.
- Stud welded fasteners.
- Street furniture.
- Structural steelwork.
- Tanks and vessels.
- Trailer chassis.
- Vintage car chassis restoration.
- Wear coatings.